Although modern dishwashers today have a long life, it does not mean that throughout this period to work flawlessly. Before calling the master whom you hazard pay, read the ways in which you are unable to solve some of the simpler failure. "Smart" solutions to minor problems are taken from the book Ariane Cohen which are usually integrated customer complaints when the dishwasher comes .
1 When I open the machine at the bottom of the water. Why?
Do you have a clogged drain. Empty the dishwasher, look for the filter and clean it. The main culprits for this problem are chicken bones, broken glass and a variety of films, which are invisible to the eye.
2 Why did the dishes after washing dirty?
You may be clogged sprinklers. Unplug the machine from the power supply, empty the water and pull the nozzle out (can be moved for cleaning, refer to the instructions that). Well check out all the holes, and if they are clogged, clean them with a toothpick.
If everything looks good, the problem might be in the warm water - not warm enough to melt fat. In this case, refer to the instructions.
3 Why glasses are not great but solid stain?
Put them in vinegar for five minutes - if you become great, it means that your water is too hard. In that case, put more detergent in the machine. If the stain remains, the problem is prevrućoj the temperature of washing or using too much detergent.
4 The machine is spreading bad smell, like burned out
You probably have an older model machine with a visible heating element at the bottom. Foods with a washer here and there probably fall on him, so he burns. Remove it.
5 What can I do to get rid of stubborn fat in the machine?
The temperature may be in the machine at a temperature that is required to melt fat. See instructions.If your machine does not have thermostat (most of them still have), raise the temperature of water in the tank is 5 ° C.
6 How to get rid of whitish spots on the dishes?
You have very hard water, use more rinse aid.
7 How to prevent the doors leak?
First check that maybe some piece washer is not stuck, so why can not a good idea to close the door. If all is well, maybe not "lie" right. If you see that the doors do not stand in line, take the tool and tighten or loosen the screws for the doors securely in place.
In addition, the problem may be in the tire around the neck, in which case you need to change it.
1 When I open the machine at the bottom of the water. Why?
Do you have a clogged drain. Empty the dishwasher, look for the filter and clean it. The main culprits for this problem are chicken bones, broken glass and a variety of films, which are invisible to the eye.
2 Why did the dishes after washing dirty?
You may be clogged sprinklers. Unplug the machine from the power supply, empty the water and pull the nozzle out (can be moved for cleaning, refer to the instructions that). Well check out all the holes, and if they are clogged, clean them with a toothpick.
If everything looks good, the problem might be in the warm water - not warm enough to melt fat. In this case, refer to the instructions.
3 Why glasses are not great but solid stain?
Put them in vinegar for five minutes - if you become great, it means that your water is too hard. In that case, put more detergent in the machine. If the stain remains, the problem is prevrućoj the temperature of washing or using too much detergent.
4 The machine is spreading bad smell, like burned out
You probably have an older model machine with a visible heating element at the bottom. Foods with a washer here and there probably fall on him, so he burns. Remove it.
5 What can I do to get rid of stubborn fat in the machine?
The temperature may be in the machine at a temperature that is required to melt fat. See instructions.If your machine does not have thermostat (most of them still have), raise the temperature of water in the tank is 5 ° C.
6 How to get rid of whitish spots on the dishes?
You have very hard water, use more rinse aid.
7 How to prevent the doors leak?
First check that maybe some piece washer is not stuck, so why can not a good idea to close the door. If all is well, maybe not "lie" right. If you see that the doors do not stand in line, take the tool and tighten or loosen the screws for the doors securely in place.
In addition, the problem may be in the tire around the neck, in which case you need to change it.
Nema komentara:
Objavi komentar
Napomena: komentar može objaviti samo član ovog bloga.